Iveco ACCO 8x4

Request a Quote

Request a no obligation, free quote on this product from your choice of dealers.

  • Engine: Cummins ISL Euro 5 (ADR 80/03)
    Maximum Output: 320hp/239kW @ 2100rpm
    Maximum Torque: 996lb ft/1350Nm @ 1300rpm
    Emissions Technology Selective Catalytic Reduction (SCR)
    Air Filter: Donaldson Radial Seal 381mm dry element air cleaner with safety element
    Exhaust: Vertical exhaust catalyst on RHS with perforated heat shield, Engine exhaust brake
    Total Displacement: 8.9 litres
    Optional Engine: Ratings 340hp/254kW @ 2100rpm & 1106 Ib ft/1500Nm @ 1300rpm
    Optional: Centrifuge oil spinner, Underslung exhaust for front lift ompactors (5.84m wheelbase)
    Cooling System: Radiator frontal area: 783in²
    Charge air cooler frontal area: 622in²
    Supplementary cooling fan (compactor)
  • Transmission: Allison Gen 5 3200 series 6 speed automatic with external transmission cooler
    PowAuto PA38 (1.16:1) 650Nm hot shift transmission mounted PTO with mounting support bracket
  • Front Axle & Suspension: Meritor FG941 & FG943
    Type: Forged steel I-beam with alloy hubs (agitator)
    Capacity: 13.2 tonnes
    13.4 tonnes
    Optional: Hendrickson Steertek axle with Airtek suspension, convolute leaf spring and shock absorbers with drum brakes
    Suspension Type: Heavy duty multi leaf springs, load share
  • Rear Axle & Suspension: Meritor RT40-145G (compactor)
    Meritor RT40-145GA with aluminium differential carrier (agitator)
    Alloy hubs (agitator), cast hubs (compactor)
    Capacity: 18.1 tonnes
    20.8 tonnes
    20.0 tonnes
    18.0 tonnes
    Ratio: 6.14
    Optional: Driver controlled differential lock (not available with RT40-145GA)
    Hendrickson Primaax PAX462 (Air)
    Hendrickson HAS460 (Air), (not available with Airtek)
    Suspension Type: Hendrickson, Haulmaax HMX460 (rubber block)
  • Driveline: Spicer 1710 Series main driveshaft
    Spicer 1710 Series inter-axle shaft
  • Front Axle & Suspension: Meritor FG941 & FG943
    Type: Forged steel I-beam with alloy hubs (agitator)
    Capacity: 13.2 tonnes
    13.4 tonnes
    Optional: Hendrickson Steertek axle with Airtek suspension, convolute leaf spring and shock absorbers with drum brakes
    Suspension Type: Heavy duty multi leaf springs, load share
  • Suspension Type: Hendrickson, Haulmaax HMX460 (rubber block)
    Capacity: 20.8 tonnes
    20.0 tonnes
    18.0 tonnes
    Optional: Hendrickson Primaax PAX462 (Air)
    Hendrickson HAS460 (Air), (not available with Airtek)
  • Type: 2-circuit air system
    Front & Rear: Drum brakes with automatic slack adjusters, park brake acting on second steer and rear wheels, brake exhaust silencer and lightweight steel brake drums (agitator) and cast brake drums (compactor)
    Bendix 4 channel ABS with Active Traction Control (ATC)
    Bendix air dryer
    Steel air tanks
    Optional: Electronic stability control (ESC), (only available on agitator spec)
    Aluminium air tanks
  • Steering: Sheppard M110 & M100 power-assisted with gear driven pump, adjustable steering column and 470mm steering wheel
  • Wheels: 8.25DC x 22.5 10-stud 335mm PCD steel (compactor), 8.25DC x 22.5 10-stud 285mm PCD alloy (agitator)
    Front tyres: Dunlop SP350* 11R22.5
    Rear: Dunlop SP431A* 11R22.5
    Optional: Alcoa* 8.25DC x 22.5, Durabrite finish, Spare wheel carrier (supplied loose), Spare rim
    Alternative tyre sizes, brands and tread patterns available, *or different brand, equivalent model
  • Fuel System: 1 x 285 litre square alloy fuel tank
    1 x 27 litre AdBlue tank
    Fuel Pro fuel filter
  • Type: 257x89x8mm parallel-section high tensile steel channel
    Heavy duty centrally mounted front towing pin
    Square end of frame
    Three piece steel bumper
    FUPS
    Reverse buzzer
    Optional: Full C channel reinforcement
  • Type: 12 Volt
    Batteries: 3 x N50 – 70A
    Optional: 3 x N70 – 90A
    Alternator: 12 Volt 170A
    2 pole isolation switch
  • Cab Constructions:
    2180mm wide cab with zinc-coated outer panels and Electrophoretic deposited steel cab with hydraulic lift, Four point cab mounting system with rubber block front and air springs dampers rear
    Cab Features:
    Fully adjustable ISRI air suspension driver’s seat with integrated lap sash seat belt and adjustable lumbar support
    Fixed ISRI passenger seat with lap sash seat belt
    Heavy duty trim
    Heavy duty radiator guard and stone shield
    Headlight protection grid
    Radio/CD MP3 player with Bluetooth
    Heated motorised mirrors
    12 volt accessory socket
    Electric windows
    Electric or air horn
    Drink bottle holder
    In-cab body builder electrical and air connection
    Park brake alarm - horn alert
    Optional:
    Air suspended single passenger seat
    Fixed passenger bench seat, (Drink bottle holder not available)
    LED rear tail lights
    Rotating roof light
    Sunvisor
    Variable pitch reverse buzzer
    Fire extinguisher
    Supplementary cooling fan, (agitator)
    Overhead console
    * Subject to conditions:
    Refer to your authorised Iveco Dealer for:
    Detailed information.
    Full Warranty details and limitations.
    The latest details on specifications, options, prices and availability.

Request Quote

You might be interested in...